TB6600 Microstep Driver Peak 4A, 9-42 VDC [Aluminum Cover] 2-Phase

TB6600 Microstep Driver Peak 4A, 9-42 VDC [Aluminum Cover] 2-Phase

Features:

> DC 9-42V power supply ( 12-24V recommended )

> Control signal input voltage is universal from 3.3V to 24V

> 6 types of subdivision accuracy are available, the largest 32 subdivision

> The output peak current can reach 4.0A (suitable for 1.8NM and below 57, 42 stepper motors)

> H-bridge bipolar constant current drive

> Input signal high-speed optocoupler isolation

> Built-in temperature protection and over-current protection

> Automatic half flow reduces heat generation

> Motor noise optimization function

> Compact size saves space

* Can control 2-phase stepper motor forward and reverse rotation
* With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
* Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.

Environment:
- single chip bipolar sine microstep stepper motor driver
- the new BiCD 0.13 nm process
- up to 42V
- resistance (a +) = 0.4.
- the forward and reverse rotation control
- 6 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16, 1/32)
- output current: IOUT = 4.0A (peak, in 100ms)
- rated output: IOUT = 3.5 A
- package: HZIP25 - 1.00F
- input port internal pull-down resistor: 100 K.
- alarm output pin current:Ialert = 1mA
- monitoring output pin (MO): Imo= 1mA
- with reset and enable pin
- with standby function.
- Break through the traditional, single power supply
- built in overheating protection (TSD) circuit
- Undervoltage protection, built-in (UVLO) circuit
- built-in overcurrent detection (ISD), circuit 

Pinouts

ตัวอย่างการใช้งาน ไดร์ฟ ร่วมกับ สเต็ปเปอร์มอเตอร์ และ โปรแกรม GRBL